The Panel is built up of 6 separate sheets which consist of front panel, two side panels, door frame & roof providing rigidity and strength.
The enclosure is constructed by using CRC sheet and is equipped with interior lamp, anti – condensation heater etc.
It is suitable for floor mounting and bottom entry of auxiliary power and multi core cable. If needed top cable entry panels can be designed
Suitable earthing is provided.
Distribution Transformer
Technical Specifications:
Product Range : 25 KVA to 1000 KVA
Voltage Class : Primary : 11 kV, Secondary: 433 V or any voltage class suitable for customizing
Cooling : Oil cooled / Air cooled
Type : OFF-LOAD TAP CHANGER (OCTC).
Frequency : 50 Hz
Vector Group : As per IS 1180, IS 2026
Power Transformer
Technical Specifications:
Product Range : 5 MVA and upto 31.5 MVA
Voltage Class (KV) : Primary: 33, 66, 110, 132, Secondary: 11, 33 or any voltage class suitable for customizing
Type : On-load tap changer (OLTC), 17 Position.
Frequency : 50 Hz
Vector Group : As per IS 2026 and IEC
Reference Standards : IS 2026, IS 1180 and other relevant standards
RMU
Technical Specifications:
Ratings upto 24kV, 630A
20kA for 3 sec STC for 22kV and 21 kA for 3 sec for 11kV
50 Nos. Shortcircuit operations, longer life
Compact and extensible type
SF6 Stainless steel tanks & cable boxes are fully internal arc tested for 21 kA for 1 sec ( AFLR category)
Sub Stations and Transmission Line
A substation is a part of an electrical generation, transmission, and distribution system. Substations transform voltage from high to low, or the reverse, or perform any of several other important functions.